Manncorp BW350 Benchtop Wave Solder Machine Specifications

Posted by Manncorp

Manncorp BW350 Benchtop Wave Solder Machine Specifications

For more information, please visit the website: Manncorp Benchtop Wave Soldering Machine

Manncorp New Product: MC600/MC1200 SMT Stencil Printer

Posted by Manncorp

MC600/MC1200 SMT Stencil Printer: Fully Automatic Bench-Top Stencil Printer with
available dual camera vision and flexible tooling

MC600 Print Area - 600mm x 400mm
MC600L Print Area - 600mm x 600mm
MC1200 Print Area - 1200mm x400mm

For more information, please visit the website: Manncorp SMT Stencil Printer

Visit Us Next Week At APEX Show 2012. Drop By Booth #2907

Posted by Manncorp

Visit us next week at APEX show 2012. Drop by booth #2907. Manncorp is exhibiting MC-385V1V Pick and Place Machine: 5,000 cph Pick & Place Up to 128 Feeders and 30 um 3 Sigma Accuracy, CR-4000C Reflow Oven: Lead-Free Reflow 16" Pin Conveyor Over 20" Stainless Steel Mesh Belt and BR-750 BGA Rework System: Split-Vision Rework Station w/Auto Placement, BGA & Fine-Pitch.

Manncorp's Upated Split-Vision Rework System Now Automatically Places BGAs, CSPs, QFNs & PoPs

Posted by Mike Schwartz, Marketing Director of Manncorp

A rework station with higher-resolution split-vision for easier and more accurate alignment has been introduced by Manncorp. The lead-free system BR750, to be exhibited at Manncorp’s APEX booth #2907, also contains ultra-precise processing controls to meet the challenge of removal and placement of BGAs, CSPs, QFNs, PoPs and other subminiature surface mount devices.

A key to the system’s enhanced performance is its innovative heating, including independent and fully programmable top and bottom hot air, plus rapid on/off IR underheaters. The latter eliminates thermal tension that can damage boards or components adjacent to those being processed. With eight different set points, exact thermal conditions can be produced for profiles containing heating rate, target temperature, dwell time and cooling. The profiles are shown in real time on a convenient LCD display.

After entering their size, SMDs are automatically pre-aligned and picked up from the component nest at their exact centers. An upward-looking camera then verifies positioning at all four corners of each device, while split-vision optics and electronic zoom adjustment of up to 22x does the fine tuning. This procedure is said to be extremely efficient in handling rework involving removal and placement of the same components repeatedly. Added guidance comes from LED lighting that clearly projects superimposed images of component leads and PCB pads on a full color LCD display. The BR750 BGA rework system will handle PCBs up to 500mm x 550mm and component sizes from 1mm x 1mm to 60mm x 60mm.

“Our customers are most impressed with the advanced capabilities and performance of BR750 and equally amazed at its breakthrough price of only $19,995,” CEO Henry Mann stated. “By making quick work of desoldering, component removal, resoldering and placement, this machine will most assuredly prove to be a wise investment.” For details, access Manncorp BR750 BGA rework system, call 1.800.PIK MANN (745.6266) or e-mail sales@manncorp.com

Manncorp CR-4000T Reflow Oven

Posted by Manncorp

Manncorp CR-4000T Reflow Oven: The Industry's Most Affordable In-Line Hot-Air Convection Reflow Oven for Mid-Volume Lead-Free Soldering

Customers may also be interested in Manncorp Convection Reflow Oven and Benchtop Reflow Oven.

For more information, please visit the website: Manncorp Reflow Soldering Oven for Every Soldering Application

Manncorp CR-5000F 5-Zone Lead-Free Convection Reflow Oven Customers Reviews

Posted by Manncorp

5000F Convection Reflow Oven Users Include:

Switchit, Missouri City, TX -- Mark Parker
Manncorp has provided excellent equipment and service which has expanded our business
IMET, Bristol, PA – Tom Krol
Megger, Norristown, PA – Greg Wolfe
Microframe Corporation, Broken Arrow, OK – Dan McCullough

Manncorp CR-6000 Reflow Ovens for Reflow Soldering Application

Posted by Manncorp

Manncorp CR-6000 Reflow Soldering Oven comes standard with 6 full zones of hot-air convection heating, each with independent upper and lower temperature controls, a combination adjustable edge-pin/stainless steel mesh belt conveyor, three thermocouple inputs, and a computer controller with a user-friendly Windows-based operating system for precision temperature profiling.

Customers may also be interested in Manncorp Convection Reflow Oven and Benchtop Reflow Oven

For more information, please visit the website: Manncorp Reflow Ovens for Every Reflow Soldering Application.

New SMT Dispensers Are Available Now

Posted by Manncorp

SMT Dispensers/Dispensing Equipment: For Low, Mid and High-Volume Applications

Manncorp SMT dispensers/dispensing equipment is available in a range of models suited to most applications. There are units for every budget, from compact hand-held dispensers to automatic stations able to dispense dots remotely and at controllable speeds from an almost instantaneous 0.01 of a second to

a prolonged dwell of 99.99 seconds. They offer numerous advantages - from drip-free design to fill volume compensation, as well as glob-top and underfill applications. Not only reliable and versatile, Manncorp SMT dispensers are also economical. Just click on the "Insta-Quote" link for an immediate price quote to take advantage of our unsurpassed website-to-you SMT Equipment pricing.

For more information, please visit the website: Manncorp SMT Dispensers/Dispensing Equipment

New PC-350W-ST PCB Conveyor Is Available Online

Posted By Penny Tang, Manncorp

Check out our PC-350W-ST PCB conveyor: When used to merge two production lines into one, the PC350W-ST PCB conveyor line combiner can take advantage of the increased throughput of a single reflow oven. Or, it can also split a single line into two to get more mileage out of a higher speed stencil printer by allowing it to serve a second line.

For more information, please visit the website: Manncorp PCB Conveyors

Manncorp CR-8000/CR-10000 SMT Reflow Ovens

Posted by Manncorp

Manncorp 8-Zone CR-8000 and 10-Zone CR-10000 Reflow Soldering Ovens include a combination 570 mm (22.4") stainless steel mesh conveyor and adjustable pin-type conveyor for PCBs up to 450 mm (17.7") wide, feature a proprietary combination of high mass heat sources and efficient thermal heat transfer.

Customers may also be interested in Manncorp Mid-Hi Volume Reflow Ovens and Low Volume Reflow Soldering Ovens

For more information, please visit the website: Manncorp SMT Reflow Station

You Should See What We Are Showing At APEX Booth #2907

Posted by Manncorp

Manncorp is exhibiting MC-385V1V Pick and Place Machine: 5,000 cph Pick & Place Up to 128 Feeders and 30 um 3 Sigma Accuracy, CR-4000C Reflow Oven: Lead-Free Reflow 16" Pin Conveyor Over 20" Stainless Steel Mesh Belt and BR-750 BGA Rework System: Split-Vision Rework Station w/Auto Placement, BGA & Fine-Pitch at APEX on March 1 San Diego, CA.

Manncorp Trident LD PCB Cleaning Machine

Posted by Manncorp

Manncorp Trident LD PCB Cleaning Machine (PCB Washer): Not Only Defluxes PCBs, But Tests Them for User-Selected Cleanliness Level.

For more information, please visit the website: Manncorp PCB Washer (PCB Cleaning Machine)

Manncorp Dr. Storage Desiccator Cabinets/Desiccant Dry Boxes

Posted By Penny Tang, Manncorp

Manncorp Dr. Storage Desiccator Cabinets/Desiccant Dry Boxes, comply with J-STD-033B and have two or more drying modules, regeneration of drying media is automatic. Also available are QDN or Quick Dry Nitrogen modules, which add positive internal pressure using nitrogen.

For more information, please visit the website: Manncorp Dr. Storage Desiccator Cabinets/Desiccant Dry Boxes

Customers may also be interested in other Manncorp PCBs Desiccator Cabinets/Desiccant Dry Boxes

Manncorp CR-3000 Convection Reflow Soldering Oven

Posted by Manncorp

Manncorp CR-3000 Convection Reflow Soldering Oven with a 13" mesh belt conveyor, three independently controlled heat zones is a multi-purpose, forced hot-air convection oven, suitable for a wide range of curing, drying and heat-treating applications.

For more information, please visit the website: Manncorp Low Volume Reflow Soldering Oven

Customer may also be interested in Manncorp High Volume Reflow Oven

Manncorp T40W series of baking desiccant dry cabinets

Posted by Manncorp

Manncorp T40W series of baking desiccant dry cabinets offer a superior method of storing MSD (moisture-sensitive-devices) parts, as they can be used not only to store MSD parts at ≤ 5% RH, but also to reset the floor life of parts that have been over-exposed to ordinary air containing humidity, by low temperature baking.

For more information, please visit the website: Manncorp Desiccator Cabinets for PCBs

Manncorp CR-4000M Reflow Soldering Oven

Posted by Manncorp

Manncorp CR-4000M Reflow Soldering Oven handles boards up to 350 mm (13.7") wide. With four independent reflow zones, three thermocouple inputs, this convection reflow oven is the perfect solution for testing, prototyping, and short-run or pilot production.

For more information, please visit the website: Manncorp Reflow Soldering Oven

Customer may also interested in Manncorp Mid to Hi Volume reflow oven

Manncorp Benchtop Reflow Soldering Oven: Lead-Free Bench-Top/Batch Reflow Ovens from $3,795

Posted by Manncorp

Bench-Top Batch Reflow Ovens Heated by Forced Hot Air Convection
With temperature ranges as high as 360ºC and PID control down to ±1.5%, these low-volume bench-top/batch reflow soldering ovens are equipped for precise lead-free reflow. There is even a nitrogen capability in model BT300NCP. For programming ease, systems include Windows-compatible software

For more information, please visit the website: Manncorp Benchtop/Batch Reflow Ovens

SMT Reflow Soldering Ovens: Low Volume, Inline Convection Soldering Reflow Ovens from $9,995

Posted by Manncorp

Inline Reflow Ovens for Low Volume Soldering Applications
Manncorp multi-zone CR Series SMD reflow ovens are available for both conventional and lead-free solders. They are designed and built to the highest standards while attaining excellent cost/performance ratio. Models shown include KIC's Auto Focus Power Software.

For more information, please visit the website: Manncorp Convection SMT Reflow Soldering Ovens (Low Volume, Inline)

Manncorp SMT Reflow Soldering Ovens: Lead-Free Mid to High Volume Production Soldering Ovens from $18,995

Posted by Manncorp

CR Series Reflow Ovens for Every Reflow Soldering Application
Manncorp multi-zone CR Series SMT reflow soldering ovens are available for both conventional and lead-free solders. They are designed and built to the highest standards while attaining excellent cost/performance ratio. Models shown include KIC's Auto Focus Power Software. (CR-4000T excluded)

For more information, please visit the website: Manncorp Convection Reflow Ovens